Home » Heavy Goods, Machines » Other Machines
Pneumatic Operated Butterfly Valve Manufacturer 
Location : Gujarat
» Ahmedabad
» Old City
» Maninagar
Posted on : 26-Oct-2009
|
|
Center Rubber Lined Butterfly Valve Manufacturer
Replaceable Sleeve Type Butterfly Valve Manufacturer
Concentric, Slim-Seal Design Butterfly Valve Manufacturer
Flangeless, Wafer, Sandwich Type Butterfly Valve Manufacturer
Wafer / Lug / Double Flanged Type Butterfly Valve Manufacturer
Damper Type Butterfly Valve Manufacturer |
|
Dharmi Engineers Wafer Type Butterfly Valve have been developed with extensive application, design and manufacturing expertise. Dharmi Engineers High Performance Slim-Seal, Concentric design Butterfly Valves are reliable, maintenance free shutoff with permanently gas-tight seal with an integrally moulded or replaceable elastomer body liner. Dharmi Engineers Butterfly Body having two nos. flange locating holes for sizes up to 12” and from size 14” and above 04 nos. for easy alignment of valve during installation. Flange locating hole confirm to as per ANSI B 16.5 Class 125 & Class 150 / BS 10 Table “D”, “E”, “F” / PN 6, PN 10, PN 16 or other international standard. Dharmi Engineers High performance butterfly valves are also available with Full-Lugs type body with raised faces and flanged ends connection on request.
Dharmi Engineers Butterfly Valve, Wafer Type, Slim-Seal design, maintenance free shutoff. This butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.
Dharmi Engineers Slim Seal design Butterfly Valves body seat mechanism have a very low torque, tight shut off with zero leakage, compact actuator selection, and long life smooth easy operation. The slim-seal, center disc design valves are widely available with different combination of body, seat & disc materials to satisfy the need of most industrial application. |
|
Valve Operation : |
|
Dharmi Engineers Butterfly Valves are generally supplied with manual hand lever operation up to 10” and above gear unit operated. Dharmi Engineers also offering Butterfly Valves with either Pneumatic or Electrical actuator operated for automation. | |
|
|
|
|
Concentric, Slim-Seal Design |
|
|
Greater Sealing Capacity |
|
|
Soft Seat Design |
|
|
Lower Torque with any fluid |
|
|
Permanently tight closure |
|
|
Bi-Directional Valve |
|
|
Optimum operation under Vacuum Condition |
|
|
Suitable for On-off as well as Throttling Service | |
|
|
Materials for almost all media |
|
|
Short Face To Face Dimension |
|
|
Wafer Design Body |
|
|
Long Service Life |
|
|
Smooth, Easy Operation |
|
|
Maintenance Free Version |
|
|
Less Weight, Easy To Install | | |
|
|
|
Design & Testing International Standard : |
|
|
Valve Design |
: |
BS 5155 / API 609 |
|
|
Pressure Testing |
: |
BS 6755-I / API 598 |
|
|
Face To Face |
: |
ANSI B 16.10 |
|
|
Flange Drilling |
: |
ANSI B 16.5 / BS 10 Table / DIN / IS / JIS Std. |
|
|
Pressure Rating |
: |
PN 10 / PN 16 |
|
|
Leakage Class |
: |
Class VI (Zero Leakage) |
|
|
Size Range |
: |
40NB to 600NB |
|
|
Operation |
: |
Up to 250NB Flow-Control Lever Operated and above Gear Operated. On special request Gear Operation also available from 80NB size. | |
|
|
|
|
Off Set Disc Design Butterfly Valve for high pressure & temperature service. |
|
|
Moulded / Replaceable Seat option |
|
|
Gear / Pneumatic Rotary Actuator Operated |
|
|
P.T.F.E. (PFA/FEP) Lined Butterfly Valve |
|
|
Flanged End, Butterfly Valve |
|
|
Damper Type Butterfly Valve for High Temperature Air Service |
|
|
Off Set Disc Design Butterfly Valve for high pressure & temperature service |
|
|
Tailor Made Valve | |
|
|
|
Material of Construction : |
|
Disc |
Seat (Liner) |
|
|
Cast Iron to ASTM A 126 Class B
IS 210 GR. FG 200 / 220 / 260 |
|
|
Ductile Iron to ASTM A 536 Grade 65-45-12 |
|
|
Cast Carbon Steel to ASTM A 216 GR. WCB |
|
|
Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M |
|
|
Aluminium Bronze ASTM B 148-C95400 |
|
|
Nylon Coating on C.I. / D.I. / WCB / S.S. Disc Material |
|
|
EPDM / Neoprene / Hypalon ® / Nitrile Rubber / Buna-N |
|
|
RubberEncapsulated on C.I. / D.I. / WCB / S.S. Disc Material |
|
|
P.T.F.E. (PFA / FEP) Lined on C.I. / D.I. / WCB / S.S. Disc Material | |
|
|
EPDM |
|
|
EPDM Food Grade |
|
|
Buna – N |
|
|
Black Nitrile |
|
|
Neoprene |
|
|
Hypalon ® |
|
|
Silicon |
|
|
Viton ® |
|
|
P.T.F.E. | |
|
Body |
Stem |
|
|
Cast Iron to ASTM A 126 Class B
IS 210 GR. FG 200 / 220 / 260 |
|
|
Ductile Iron to ASTM A 536 Grade 65-45-12 |
|
|
Cast Carbon Steel to ASTM A 216 GR. WCB |
|
|
Stainless Steel to ASTM A 351 GR. CF 8 / 8M / 3 / 3M | |
|
|
AISI 410 (S.S. 410 – 13% Cr. Steel) |
|
|
AISI 304 (S.S. 304) |
|
|
AISI 316 (S.S. 316) |
|
|
AISI 304L (S.S. 304L) |
|
|
AISI 316L (S.S. 316L) |
|
|
Carbon Steel to BS 970 | | |
|
|
|
Body Test |
|
1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test. |
|
Seat Test |
|
1.5 times the working pressure with water. |
|
Function / Operation Test |
|
At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc. |
|
Special Test |
|
On request, any other test can be carried out according to special instruction by client | |
|
|
|
|
Water Treatment Plant |
|
|
Paper Industry |
|
|
Sugar Industry |
|
|
Breweries |
|
|
Chemical Industry |
|
|
Waste Effluent Treatment Plant | |
|
|
Drilling Rigs |
|
|
Gas Plant |
|
|
Cooling Water Circulation |
|
|
Heating & Air Conditioning |
|
|
Pneumatic Conveyors |
|
|
Compressed Air | | |
|
|
|
Please specify below details at the time of enquiries/orders: |
|
|
Types of Valve |
|
|
Pressure Rating Class |
|
|
Valve Size |
|
|
Type of End Connection |
|
|
Material of Construction |
|
|
Disc Material |
|
|
Rubber Seat Material | |
|
|
Flow Medium (Service) |
|
|
Design Pressure |
|
|
Operating (Working) Pressure |
|
|
Design Temperature |
|
|
Operating (Working) Temperature |
|
|
Type of Operation Manual / Pne. / Ele. Etc. | | |
|
|
|
Wide Range of Industrial Butterfly Valve |
|
|
Cast Iron Butterfly Valve Manufacturer |
|
|
Cast Carbon Steel Butterfly Valve Manufacturer |
|
|
Cast Stainless Steel Butterfly Valve Manufacturer |
|
|
Slim-Seal Design Butterfly Valve Manufacturer |
|
|
Rubber lined Butterfly Valve Manufacturer |
|
|
P.T.F.E. lined Butterfly Valve Manufacturer |
|
|
Wafer Type Butterfly Valve Manufacturer |
|
|
Damper type Butterfly Valve Manufacturer | | |
Related to : Pneumatic Operated Butterfly Valve Manufacturer, Pneumatic Operated Butterfly Valve, Pneumatic Actuator Operated Butterfly Valve, Pneumatic Actuator Operated Butterfly Valve Manufacturer, Rubber Lined Wafer Type Butterfly Valve Manufacturer Gujarat
Contact : Bhavesh B Panchal
Rating : 
(2 votes) Rate | Add to Favorites | Print this Page | Tell-a-friend
Related Ads
AUTO LATHE, COPYING LATHE, TOOL ROOM AND OTHER LATHES , SEAL GRINDER, PROFILE PROJECTOR, TIP GRINDER ETC.
Manufacturer and supplier of pharmaceutical machinery, pharmaceutical filling machinery, pharmaceutical sealing machinery, pharmaceutical cleaning machinery, air jet cleaning machines, automatic rotar
Manufacturer, exporter of plastic machinery, plastic extrusion
machineries, plastic extrusion plants, blown film plant, PPTQ film plant, box
strapping plant, sutli plant, stretch film plant, cling f
Dharmi Engineers manufacturing all types of valves with P.T.F.E. (PFA/FEP) / Teflon® Lined valves and it can be equipped with a Manual Handle or with Pneumatic or Electric Actuators operated. Ful
Flush Bottom Ball Valve
Single Piece Simple DesignFlanged End ConnectionManual Lever / Gear / Pneumatic Operated Ball Valve
Dharmi Engineers offers a range of Flush Bottom Bal
We are based in Vadodara (Gujarat - India), from where we regulate all our business activities. Our Size Reduction Machine have diverse industrial applications. They are effectively installed and perf
Categories