Authorised Traders Of AR 400 Plate in India

Abrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry. The key quality for wear resistant steels is their hardness. We sell wear plate according to its hardness measured on the Brinnell Hardness Test- usually in 400HB grades. 400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (150HB). Example uses are for construction machinery, skips, bulldozers and excavators, buckets and conveyors. Steels with a hig HB rating (Briness Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant. The steel is quenched which provides wear resistance; in order to improve hardness it may also be tempered. Lower HB's generally provide good cold bending properties and good weldability. Weldability is not generally reduced as the hardness increases. Wear resistant steels are not appropriate for use at temperatures over 250 degree C as the heat can cause changes to the material properties. Yields for 400HB steel are in the region of 100MPa with tensile strengths of about 1250MPa. It is not registered at international standard association such as ASTM Jin, Din so each manufacture has their own Brand name like Rockhard 400, ABREX, SUMIHARD, RAEX, JFE, XAR, BIS.